The problem
Problem overview
Understand the site failure mode before selecting a system.
Carbonation, chlorides, and UV attack unprotected concrete and steel. Protective coatings and sealants slow deterioration and cut lifecycle cost.
Common issues
- 1Carbonated concrete cover
- 2Corroding steel members
- 3Failed expansion joints
- 4Weathered facade finishes
Before and after comparison slider
AfterBefore
AfterBeforeDrag to compare typical failure vs. remediated condition.
Applications
Where used
Typical surfaces and project areas for this system.
Area 01
Facades
Area 02
Steel structures
Area 03
Marine assets
Area 04
Joints
Path
From problem to enquiry
How Protective Coatings guides you to the right products.
- 1
Problem
Match the site failure to a known construction challenge.
- 2
System
Select the Primadonn solution built for that use-case.
- 3
Products
Choose recommended products with the right chemistry.
- 4
Enquire
Talk to our team for specs, dosing, and site support.
Products
Recommended products
Start with these Primadonn products for this solution.
How to apply
Application steps
A practical sequence for site teams — always follow the product datasheet.
- 1
Step 01
Assess exposure
Match coating chemistry to UV, chemical, and marine exposure.
- 2
Step 02
Surface preparation
Clean, degrease, and profile steel or concrete as required.
- 3
Step 03
Apply protective system
Prime and coat to the specified DFT; seal joints with compatible sealant.
- 4
Step 04
Inspect & maintain
Check thickness and coverage; plan touch-up cycles for severe sites.
On site
Application showcase
See the system in context — click an image to open the gallery.
Watch
Videos
Short overviews and detailing guidance for this solution.
