The problem
Problem overview
Understand the site failure mode before selecting a system.
Tiles fail when adhesives cannot handle substrate movement, wet exposure, or large-format loads. The right fixing system keeps floors and walls bonded for the long term.
Common issues
- 1Hollow-sounding tiles
- 2Debonded wall tiles
- 3Grout washout in wet zones
- 4Uneven bed thickness
Before and after comparison sliderAfterBefore
AfterBeforeDrag to compare typical failure vs. remediated condition.
Applications
Where used
Typical surfaces and project areas for this system.
Area 01
Floors
Area 02
Walls
Area 03
Wet areas
Area 04
Lobbies
Path
From problem to enquiry
How Tile Fixing guides you to the right products.
- 1
Problem
Match the site failure to a known construction challenge.
- 2
System
Select the Primadonn solution built for that use-case.
- 3
Products
Choose recommended products with the right chemistry.
- 4
Enquire
Talk to our team for specs, dosing, and site support.
Products
Recommended products
Start with these Primadonn products for this solution.
How to apply
Application steps
A practical sequence for site teams — always follow the product datasheet.
- 1
Step 01
Check substrate
Confirm level, dryness, and that waterproofing (if any) is cured.
- 2
Step 02
Mix adhesive
Prepare polymer-modified adhesive to a creamy, lump-free consistency.
- 3
Step 03
Butter & bed
Comb adhesive, place tiles with full coverage, and check for voids.
- 4
Step 04
Grout & clean
Grout after set; clean haze and protect until fully cured.
On site
Application showcase
See the system in context — click an image to open the gallery.
Watch
Videos
Short overviews and detailing guidance for this solution.
Technical info
Downloads
Datasheets and guides tied to recommended products.
